 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. 2-INPUT DIFFERENTIAL AND/NAND SY10EL05 SY100EL05 SY10EL05 SY100EL05 FEATURES s 275ps propagation delay s High bandwidth output transitions s Internal 75K input pull-down resistors s Available in 8-pin SOIC package DESCRIPTION The SY10/100EL05 are 2-input differential AND/NAND gates. These devices are functionally equivalent to the E404 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than the E404, the EL05 is ideally suited for those applications which require the ultimate in AC performance. Because a negative 2-input NAND is equivalent to a 2-input OR function with inverted inputs, the differential inputs and outputs of the device allows the EL05 to also be used as a 2-input differential OR/NOR gate. The differential inputs employ clamp circuitry so that, under open conditions (pulled down to VEE), the input to the AND gate will be HIGH. In this way, if one set of inputs is open, the gate will remain active to the other input. PIN NAMES Pin D0, D1 Q Function Data Inputs Data Outputs M9999-031006 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 1 Issue Date: March 2006 Micrel, Inc. SY10EL05 SY100EL05 PACKAGE/ORDERING INFORMATION Ordering Information(1) D0 D0 D1 D1 1 2 3 4 8 7 6 5 VCC Q Q VEE Part Number SY10EL05ZC SY10EL05ZCTR(2) SY100EL05ZC SY100EL05ZCTR(2) SY10EL05ZI SY10EL05ZITR(2) SY100EL05ZI SY100EL05ZITR(2) SY10EL05ZG(3) SY10EL05ZGTR(2, 3) SY100EL05ZG(3) SY100EL05ZGTR(2, 3) Package Type Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEL05 HEL05 XEL05 XEL05 HEL05 HEL05 XEL05 XEL05 HEL05 with Pb-Free bar-line indicator HEL05 with Pb-Free bar-line indicator XEL05 with Pb-Free bar-line indicator XEL05 with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031006 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10EL05 SY100EL05 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol IEE Parameter Power Supply Current 10EL 100EL Min. -- -- Typ. 18 18 -5.2 -4.5 -- Max. 22 22 -5.5 -5.5 150 Min. 14 14 -4.75 -4.20 -- TA = 0C Typ. 18 18 -5.2 -4.5 -- Max. 22 22 -5.5 -5.5 150 TA = +25C Min. 14 14 -4.75 -4.20 -- Typ. 18 18 -5.2 -4.5 -- Max. 22 22 -5.5 -5.5 150 TA = +85C Min. 14 16 -4.75 -4.20 -- Typ. 18 21 -5.2 -4.5 -- Max. 22 25 V -5.5 -5.5 150 A Unit mA VEE Power Supply Voltage 10EL -4.75 100EL -4.20 Input HIGH Current -- IIH AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol tPD VPP VCMR tr tf Parameter Propagation Delay to Output D Minimum Input Swing(1) Common Mode Range(2) Min. 135 150 (2) Typ. 260 -- -- 225 Max. 440 -- -0.4 350 Min. 185 150 (2) 100 TA = 0C Typ. 275 -- -- 225 Max. 390 -- -0.4 350 TA = +25C Min. 185 150 (2) 100 Typ. 275 -- -- 225 Max. 390 -- -0.4 350 TA = +85C Min. 215 150 (2) 100 Typ. 305 -- -- 225 Max. 420 -- -0.4 350 Unit ps mV V ps Output Rise/Fall Times Q 100 (20% to 80%) NOTES: 1. Minimum input swing for which AC parameters are guaranteed. The device has a DC gain of 40. 2. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP min. and 1V. The lower end of the CMR range is dependent on VEE and is equal to VEE + 3.0V. M9999-031006 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10EL05 SY100EL05 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-031006 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY100EL05ZGTR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |